The assisted manipulator is a kind of machine that can save labor and material resources and can improve the efficiency of the industrial industry in recent years. However, regardless of any machinery, only regular maintenance to extend the service life, and can avoid mechanical failure and accidents, so how do you need to regularly check it?
General bolt and nut loosening situation due to long periods of high-speed intense impact, screws and nuts of slack is the main reason for the failure of the robot, Jiangyin Tongli Industrial Co., Ltd. will check the project is summarized as follows.
1. Tighten the mounting bolts of each limit switch for up and down, front and back, travel and product.
2. Confirm the installation bolts of the pneumatic control cabinet of the walking body.
3. Each stopper, the loosening and tightening of the brake device.
4. The friction parts of the oil, regularly add lubricating grease, maintenance cycle, please refer to the periodic inspection cycle table.
5. Guide rails, walking track, bearings and other surface dirt cleaning, due to the cross in and cross out, up and down, front and rear line rail and rail surface wear marks, oil, dust and debris accumulation will affect the normal and effective operation of machinery.
6. Need for regular cleaning and maintenance. If there are scars on the surface of the guide rail after impact, please replace the new guide rail in time.
7. Inspection of each axis drag chain and bellows to confirm that there is no friction with other parts during operation and no aging and damage during visual inspection.
8. The air hose for piping is broken and replaced, the air hose is bruised and aged, which will lead to abnormal air pressure (air flow). If there is air leakage from each joint or air hose, please replace it in time.
9. Due to long-term use, the inevitable accumulation of moisture in the air, the need to do regular drainage treatment, while visually inspecting the air pressure value is normal and stable.
10. Operation box emergency stop button and the confirmation of the total air source.
Jiangyin Tongli Industrial Co., Ltd. as a professional booster robot manufacturers, call on the users, for their own safety and the service life of the machine, must be regularly checked, you can follow the order of inspection as above, such as encounter more do not understand the problem can always contact us!
Post time: Nov-04-2021