Automated manipulator may produce the cause of failure, because the manipulator articulation parts are mostly screw fixed, may be due to a long time vibration to form a screw loose loose; and the formation of the manipulator loose, parts of the articulation block fracture, etc.. On the other hand, the robot vibration causes the formation of loose loose wire joints, relays loose loose, the formation of poor contact with the electrical circuit and other scenes. Causes the robot chaotic initiative, electric control dead, burned electric control and other scenes.
1. Oil pressure buffer: to be changed on a regular basis.
2. With a long time the cylinder end cover seals, reflective gas pipe, joints to be replaced in a timely manner.
3. 12 months on a regular basis to reflect on the rectification of wire joints, plugs, sockets, etc.
4. Pneumatic components: abbreviated, multi-functional robotic initiatives rely on all the air source propulsion, the need for an unchanging air source turbulence is small, no water.
Because the gas and water are two different media, gas invisible, water tangible, water in the gas pipe, cylinder, electromagnetic stagnation will occur scale, the formation of solenoid valve stuck, scurrying gas, gas seal wear and tear leakage cylinder leakage, external leakage and other scenes, the cylinder initiative presented powerless, creeping, no initiative or suddenly fast initiative, gas pipe, joint burst and other scenes.
To sum up, the automated robot can efficiently replace the manual to improve the production efficiency of enterprises, and low maintenance costs, but in the daily maintenance of the maintenance should also be carefully maintained. In order to avoid causing automated robot failure, to avoid the impact on the product production efficiency of enterprises.
Jiangyin Tongli Industrial Co., Ltd. is a modern manufacturing enterprise specializing in the research and development, design, production, sales and service of storage and handling equipment automation.
Post time: Dec-10-2021